Best Heavy Machinery for Quarrying and Mining Operations in the UAE 

best heavy machinery in uae

Picture a limestone quarry in Fujairah at two in the afternoon. The primary crusher is running half empty. The excavator on the face is working flat out, the trucks are queuing, and the real culprit is a loader too small for the stockpile it feeds. 

That is how most production problems start. Choosing quarrying equipment is rarely about buying the biggest machine. It is about how well each machine matches the one before it and the one after it: face, truck, crusher, stockpile.

This guide takes the Hyundai range supplied by Al Shirawi Machinery, uses the real operating weights, and shows which machine suits which job on UAE quarry and mining sites. If you want to see the complete lineup first, the full range of excavators for sale runs from 14 to 81.6 tonnes.

Heavy Machinery for Quarries

Which machine for which job: the short answer 

For hard rock and limestone work, the Hyundai HX800L and HX500L crawler excavators handle the face, the HL775-9 wheel loader handles stockpiles and hoppers, and mid-size machines like the HX380L and HX220HD fill the gaps. Here is the full match-up.

Job on site Hyundai machine Operating weight Bucket capacity Best suited for 
Primary rock face, large hard rock quarry HX800L big mining excavator 77.7 t 5.58 m³ High-volume primary excavation and crusher feeding 
Limestone and hard rock face HX500L mining excavator 49.9 t up to about 3.2 m³ Rock face excavation, crusher feeding (25,200 kgf digging force) 
Continuous production HX380L crawler excavator 37.2 t 2.32 m³ Benching, overburden removal, hopper loading (21,600 kgf digging force) 
Secondary work HX220HD crawler excavator 21.4 t 1.2 m³ Support tasks, site preparation (15,500 kgf digging force) 
Stockpiles and plant loading HL775-9 mining wheel loader 24.6 t 4.5 m³ Aggregate stockpile management, crusher and hopper loading (249 kW) 
Smaller plants and yard loading HL760-9 wheel loader 17.9 t 3.3 m³ Loading and material handling (160 kW) 
Moving between quarry zones R210W wheeled excavator 20.5 t 0.8 m³ Drainage, site maintenance, road-adjacent work 

View All Heavy Equipment

The right Machinery

How big a mining excavator do you actually need? 

Size it to your crusher and your trucks, not to your ambitions. A common rule of thumb is that a face excavator should fill a haul truck in roughly three to five passes. Fewer passes than that and the bucket is bigger than the truck can use. Many more and the trucks sit waiting. 

Work backwards from your target tonnes per hour and the truck size, then pick the machine: 

  • HX800L (77.7 t, 5.58 m³). The big mining excavator in the range, built for primary excavation in large hard rock quarries. High-pressure fuel injection and electronic control support continuous heavy-duty cycles. 
  • HX500L (49.9 t, up to about 3.2 m³). A heavy-duty mining excavator with 25,200 kgf of bucket digging force and strong hydraulic flow. For limestone and hard rock faces feeding a crusher, it is often where production and cost meet. 
  • HX380L (37.2 t, 2.32 m³). The balanced choice for sustained output: benching, overburden removal and hopper loading, with 21,600 kgf of digging force. 
  • HX220HD (21.4 t, 1.2 m³). A support machine for secondary excavation and site preparation, not a face machine. 

Expert tip: ask how the machine will be configured for dust and heat before you sign anything. UAE summer temperatures and abrasive rock punish cooling systems and filters long before they punish the bucket. 

Why the loader matters as much as the excavator 

The excavator sets the pace at the face, but the loader sets the pace everywhere else. Every tonne of aggregate passes through a bucket on its way to a truck, hopper or stockpile. 

Two Hyundai wheel loaders cover most quarry needs: 

 HL775-9 HL760-9 
Operating weight 24.6 t 17.9 t 
Bucket capacity 4.5 m³ 3.3 m³ 
Rated power 249 kW at 2,100 rpm 160 kW at 2,100 rpm 
Typical role Mining wheel loader for large stockpiles, hoppers and crushers Smaller plants, yard loading and general material handling 

Choose the HL775-9 when the loader feeds a crusher hopper or loads trucks from large stockpiles. Its large-flow hydraulics and loader geometry are designed for fast cycle times, which is what high-volume aggregate handling equipment in the UAE needs.

The HL760-9 makes sense on smaller plants or yard duties, where a lighter machine does the job and uses less fuel doing it. If you’re comparing options before you buy, browse the full wheel loader for sale range alongside the excavator line-up.

One check worth making: the bucket should suit the hopper opening and truck body it loads. A loader that spills at the hopper wastes more time than one that takes an extra pass.

HX800L Mining Excavator

Five mistakes that cost quarries money 

  1. Specifying for the peak day. A machine sized for the busiest week of the year runs under-loaded the other fifty-one. Size for sustained output and cover peaks another way. 
  2. Ignoring the chain. An excavator, truck fleet and crusher that were each right on their own can still be wrong together. Match bucket, truck body and hopper. 
  3. Comparing price instead of cost per tonne. Fuel, wear parts, service intervals and downtime usually outweigh the gap between two quotes. 
  4. Choosing a machine before checking support. A fast, local answer on parts and technicians is worth more than a small discount. 
  5. Buying for a short campaign. Overburden stripping or a one-off expansion rarely justifies a purchase. Hire first. 

Uptime belongs in the specification 

A quarry machine earns nothing while it waits for a part. That is why after-sales support deserves a place in the buying decision, next to bucket size and engine power. 

Al Shirawi Machinery backs its Hyundai range with more than 40 years of Al Shirawi support experience across the UAE and service centres in Dubai and Abu Dhabi. In practice that means: 

  • Genuine Hyundai spare parts, supplied from a central warehouse at Dubai Investment Park 2 to branches across Dubai, Sharjah, Ras Al Khaimah and Abu Dhabi. 
  • On-site repairs and emergency support for critical breakdowns, with diagnostic tools to find the fault before parts are ordered. 
  • Preventive maintenance with scheduled inspections and programmes tailored to how hard your machines work. 

For operators who would rather plan than react, the Hi-Smart Care Plus maintenance contract covers scheduled servicing by trained technicians, using genuine Hyundai filters and fluids. The aims are a better ratio of planned to unplanned maintenance, longer planned component replacement intervals and fewer catastrophic failures. 

To see how a contract might look for your fleet, call the after-sales team on 800 434 (800HDH) or email asm.service@alshirawi.ae. 

rent heavy equipment

Rent before you buy: equipment with an operator 

Sometimes the smartest quarrying equipment decision is not to buy yet. Al Shirawi Machinery’s Plant Hire division rents Hyundai machines from a single day to the long term, and every rental includes a certified, licensed and insured operator. Bare equipment rental is not offered.

The rental fleet covers: 

  • Crawler excavators from 22 tonnes upwards
  • Wheeled excavators from 14 to 21 tonnes
  • Wheel loaders
  • Mini excavators from 3.5 to 7 tonnes, for smaller support jobs around the quarry such as drainage and site maintenance

Hydraulic breakers and trenching buckets are available with operator-included rentals. Delivery and collection are handled for you, with charges depending on location. 

Renting makes particular sense for three situations: trialling a machine size before committing, covering a short stripping or expansion campaign, and bridging a gap while your own machine is in the workshop — the same logic applies across Al Shirawi’s wider rental and transport fleet. Book ahead in busy construction periods.

Next step: talk to people who know the pit 

The right quarrying equipment depends on numbers only you have: target tonnes per hour, truck size, crusher feed opening and rock type. Bring those to a conversation and the Al Shirawi Machinery team can recommend the right mining excavator, wheel loader and support plan for your site, including rental with operator while you decide. 

Browse Excavators for Sale

Browse Wheel Loaders for Sale

Browse Mini Excavators

  • Sales: 04 371 8585 or inquiries.asm@alshirawi.ae (Monday to Friday, 8am to 6pm) 
  • After-sales and genuine spare parts: 800 434 or asm.service@alshirawi.ae (Monday to Friday, 8am to 6pm; Saturday, 8am to 5pm) 
  • Branches: Al Quoz (Sheikh Zayed Road), Dubai Investment Park 2 and Musaffah, Abu Dhabi 

Frequently Asked Questions 

What is the best excavator for quarry operations in the UAE? 

For large-scale hard rock and limestone quarries, the Hyundai HX800L (77.7 t) and HX500L (49.9 t) are the strongest fits. The HX380L (37.2 t) suits mid-size operations with continuous production.

What makes a mining excavator different from a standard excavator? 

A mining excavator is built for continuous heavy duty: a reinforced structure, high bucket digging force, a large bucket and hydraulics that sustain output across long shifts in abrasive material. 

Which wheel loader suits aggregate handling in the UAE? 

The HL775-9 (24.6 t, 4.5 m³ bucket) suits high-volume stockpile management and crusher feeding. The HL760-9 (17.9 t, 3.3 m³) suits smaller plants and yard loading. 

How many passes should an excavator take to fill a truck? 

Three to five passes is a common rule of thumb. It balances loading speed against bucket size and keeps trucks moving without overloading the machine. 

Can I rent a quarry excavator in the UAE? 

Yes. Al Shirawi Machinery rents crawler excavators from 22 tonnes upwards, plus wheeled excavators and wheel loaders, always with a certified operator. Equipment-only rental is not available. 

Are genuine spare parts available locally? 

Yes. Genuine Hyundai parts ship from a central warehouse at Dubai Investment Park 2 to branches in Dubai, Sharjah, Ras Al Khaimah and Abu Dhabi. 

Do you offer maintenance contracts for quarry fleets? 

Yes. The Hi-Smart Care Plus programme covers scheduled maintenance with genuine Hyundai filters and fluids, and service plans can be tailored to your equipment and usage. 

contact us alshirawi machinery